Cisco Nexus
CloudLabs
Projects
Assignment
24x7 Support
Lifetime Access
.
Course Overview
Cisco NexusThe Cisco Nexus family of switches is designed to meet the stringent requirements of the next-generation data center.The Cisco Nexus Series switches are modular network switches designed for the data center. Cisco Systems introduced the Nexus Series of switches on January 28, 2008. The first chassis in the Nexus 7000 family is a 10-slot chassis with two supervisor engine slots and eight I/O module slots at the front, as well as five crossbar switch fabric modules at the rear. Beside the Nexus 7000 there are also other models in the Nexus range.
At the end of the training, participants will be able to:
Pre-requisite
- Good understanding of networking protocols, routing and switching.
- Recommended CCNA certification.
- Recommended attendance of Cisco IP Routing class (ROUTE).
- Recommended attendance of Cisco Switching class (SWITCH).
Duarion
5 days
Course Outline
- NX-OS Overview
- NX-OS User Modes
- Management Interfaces
- Managing System Files
- Virtual Device Contexts
- Troubleshooting
- Topology
- Layer 2 Overview
- VLANs
- Private VLANs
- Spanning Tree Protocol
- Port-Channels
- Virtual Port Channels
- Unidirectional Link Detection
- Cisco FabricPath
- EIGRP
- OSPF
- IS-IS
- BGP
- First Hop Redundancy Protocols
Multicast Operation
PIM Configuration on Nexus 7000 and Nexus 5500
IGMP Operation
IGMP Configuration on Nexus 7000
IGMP Configuration on Nexus 5000
IGMP Configuration on Nexus 1000V
MSDP Configuration on Nexus 7000
Administrative Scoping of Multicast RPs in PIM
Configuring PIM Join and Prune Policies
Multicast and Control Plane Policing (CoPP)
- Configuring RADIUS
- Configuring TACACS+
- Configuring SSH
- Cisco TrustSec
- Configuring Cisco TrustSec: IEEE 802.1AE LinkSec
- Configuring IP ACLs
- Configuring MAC ACLs
- Configuring VLAN ACLs
- Configuring Port Security
- Configuring DHCP Snooping
- Configuring Dynamic ARP Inspection
- Configuring IP Source Guard
- Configuring Keychain Management
- Configuring Traffic Storm Control
- Configuring Unicast RPF
- Configuring Control Plane Policing
- Configuring Rate Limits
- SNMPv3
- Physical Redundancy
- Generic Online Diagnostics
- NX-OS High-Availability Architecture
- Process Modularity
- Process Restart
- Stateful Switchover
- Nonstop Forwarding
- In-Service Software Upgrades
- Unified Fabric Overview
- Enabling Technologies
- N-Port Virtualization
- Nexus 5×00 Unified Fabric Configuration
- Nexus 7000 Unified Fabric Configuration
- Hypervisor and vSphere Introduction
- Nexus 1000V System Overview
- Nexus 1000V Switching Overview
- Nexus 1000V VSM Installation
- 1000V Port Profiles
- Virtual Network Management Center
- Virtual Security Gateway
- Install Virtual Security Gateway on the Nexus 1010
- Virtual Extensible LAN
- Nexus 1000v Network Analysis Module
- QoS on Nexus 7000
- QoS on Nexus 5×00
- QoS on Nexus 1000V